8/12/2023 0 Comments Motion raceworks co2![]() ![]() This is a very standard fitting size across brands such as Tial, JGS, Precision, Turbosmart, Procharger,and many others. Our nickel plated fittings are 1/8 NPT which work with nearly every brand wastegate, blow off valve, and solenoid on the market. The C02 regulator comes preset at 80 psi which is appropriate for nearly every setup (the boost controller regulates pressure down from there). There are enough fittings in this kit to plumb the following. 269 Motorsports Motion Raceworks Single Push Button Steering Wheel Bracket - Transbrake/Bump. This all inclusive kit comes with top quality fittings, regulator, line, and bottle to plumb any Boost Controller system on the market. Biondo BKE CO2 Bottle Kit in Hoses & Hose Clamps. This all-inclusive kit comes with top quality fittings, regulator, line, and bottle to plumb any Boost Controller system on the market. The Motion Raceworks Single Turbo C02 Kit takes the guess work out of fittings. The Motion Raceworks Single Turbo CO2 Kit takes the guess work out of fittings. Mount CO2 regulator as close as possible to air cylinder for proper function, any length away adds delay and possible incomplete release.MOTION RACEWORKS SINGLE TURBOCHARGED C02 KIT Motion Raceworks Co2 twin turbo boost control kit with billet bottle bracket riding along in orrgreg Project 200MPH Buick Skylark. C02 Handle Release is meant to operate at conditions of 80 psi and higher, the higher the PSI the faster and better the function of this system. Note: Choose if you would like a bottle and bracket with kit. Cable needs to have loose swooping bends, failure to test beforehand/and or constrictive bends can cause this handle to operate slower or incorrectly. Note: Please test operation prior to going to the racetrack. CO2 Bottle (2.5lb) 25-10006 99.00 115.00 Cleetus Edition Limited Edition 13' Off-Road Wheel MPI-GT-13-CLT 319.00 Motion Raceworks Merica Shirt 96-127 24.99 Motion Heritage Hat Black/Black Mesh Back Snapback XL 95-133 24.99 Black/Heather Gray Motion Raceworks Snapback Hat w/ Mesh Back 95-111 24. Improper Installation, hookup, or misuse may result in improper function of this part. The biggest thing is you need to TEST this before heading to the track. Please note that even though this kit is meant to be a complete kit, and has been strenuously tested, refined, and appropriately changed to work under demand of today’s chassis, care needs to be taken when installing. Our design of this kit was made to operate under 80 psi, though, it operates better the higher you go up to 120psi. The Motion Raceworks Single Turbo CO2 Kit takes the guess work out of fittings. ![]() When installed properly this release kit will make for simple, reliable, release of your parachute while keeping both hands firmly planted on the wheel. Motion Raceworks SINGLE Wastegate Turbocharged CO2 Kit. Available in both single and dual cable styles. We spent a ton of time designing, redesigning, and perfecting this kit.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |